Thermal Mass Flow Meter — IZMERKON TM 600

Thermal Mass Flow Meter IZMERKON TM 600

In modern production conditions, the accuracy of energy resource measurement directly affects the cost of products and the overall efficiency of the enterprise. If a reliable tool is needed to control flows, the IZMERKON TM 600 air and gas flow meter becomes a key link in the monitoring system. This device belongs to the class of high-precision meters capable of operating in the most challenging conditions, providing stable data without the need for constant maintenance.

Essentially, this is a thermal anemometric flow meter, whose operation is based on the principle of thermal dissipation. Unlike traditional methods of measuring volume, this technology allows direct determination of the mass flow of gas. This frees engineers from installing additional pressure and temperature sensors, as well as from complex mathematical recalculations, since the device automatically outputs values normalized to "standard" conditions.

If you need to request additional technical documentation for the product or require consultation, contact the specialists at "Izmerkon". Engineers will help select the optimal sensor configuration based on the pipeline diameter and the chemical composition of the measured medium.

Features and Key Advantages of the Model

By choosing the TM 600 thermal mass flow meter, specialists get a device free from the drawbacks of mechanical counters. The main feature of the design is the complete absence of moving and rotating parts. This not only increases reliability but also makes the device insensitive to vibrations and mechanical impurities in the flow.

Main advantages of IZMERKON TM 600:

• Direct mass measurement: the result does not depend on fluctuations in density, pressure, or gas temperature in the pipeline.
• High sensitivity: the sensor detects even extremely low flow velocities, which is critically important for leak detection.
• Minimal pressure drop: the compact sensor creates almost no resistance, preserving energy in the system.
• Wide dynamic range: one device effectively operates both at minimal consumption and peak loads.
• Universal installation: the model is available in an immersion version for large diameter pipes.

Along with this device, you may also be interested in the following instruments:

To build a comprehensive accounting system at the enterprise, additional measuring instruments are often required. You may also be interested in similar devices from our catalog:

• IZMERKON TM 450 — reliable immersion sensor for standard air monitoring tasks.
• IZMERKON TM 470 — model with a measuring section for small and medium pipelines.
• VA 520 — classic thermal anemometric flow meter widely used in compressed air systems.
• VA 500 — universal device for measuring flow and consumption of gases (including technical gases).

General Information: Principle of Operation and Technologies

To understand why the thermal anemometric flow meter is considered one of the most accurate in its class, it is worth examining the physical measurement process. Inside the probe, two precision thermistors are installed. One acts as a reference sensor for the medium temperature, and the other is heated to a strictly defined temperature difference relative to the first.

When the gas starts moving, it takes away some heat from the heated element. The device's electronics instantly compensate for this loss by increasing the heating power. The amount of energy spent is directly proportional to the number of gas molecules passing through the cross-section. Thus, thermal mass flow meters measure the mass of the substance, not its volume, which can vary significantly under compression.

This approach makes the IZMERKON TM 600 ideal for accounting oxygen, nitrogen, argon, and carbon dioxide, as the thermal conductivity of these media is well studied and stable. The device is supplied with factory calibration for a specific gas type, ensuring minimal error immediately after installation.

Applications and Tasks

Main areas of use and tasks solved:

• Test benches: providing reference accuracy during equipment testing.
• Compressor equipment: monitoring compressor performance.
• Compressed air systems: the main tool for accounting air consumption in production areas.
• Oil and gas industry: measuring gas parameters in challenging conditions.
• Measurement of technical gas flow: precision accounting of nitrogen, oxygen, natural gas.
• Treatment facilities: controlling air supply in aeration systems.
• Pneumo-audit and Energy audit: detecting hidden leaks in pipelines.
• Automotive industry: controlling air flow on assembly lines and in paint booths.
• Aquaculture: control of aeration systems and precise oxygen dosing.

Flow Meter Properties and Technical Specifications

IZMERKON TM 600 stands out for its increased reliability and compactness: engineers managed to reduce the size of the housing and probe without losing measurement accuracy.

Key features and advantages of the model:

• Direct measurement of mass flow: eliminates the need to purchase correctors.
• Installation without process shutdown: possibility of installation under pressure.
• No pressure loss: saves compressor electricity.
• Intelligent diagnostics: built-in self-diagnosis function.
• Economical power consumption: only 60 mA at 24 V voltage.

Detailed technical parameters of the device

Is it possible to buy the product inexpensively and what are the delivery times?

IZMERKON TM 600 allows you to save on peripheral equipment as it does not require correctors and additional sensors. The flow meter is often available in our warehouse in Saint Petersburg, which significantly reduces delivery time to any region of Russia.

The current price of the device depends on the selected configuration. To receive a commercial offer, please contact the sales department. We will help you choose a solution that will cover your accounting needs for many years.