Standard measuring chamber for pressures up to 16 bar — Camera for dew point sensor

Description

When it is not possible to install the dew point sensor in such a way that the sensitive element is in the flow of the measured medium, it is necessary to use a measuring chamber. The chamber has a special capillary through which the measured medium is vented (at a pressure of 7 bar – approximate flow rate 1 l/min). This ensures that the medium around the sensor's sensitive element is constantly refreshed. This helps to avoid so-called stagnant zones, which negatively affect the response time of the dew point sensor. The measuring chamber is also used during pneumatic audits for temporary sensor connection via a quick-release coupling. The chamber can be connected either through a quick-release connection (type NW 7.2) or via an internal G1/4" thread.