CO2 Concentration and Temperature Converter with Analog, Relay Outputs, and Modbus RS485 Output — aSENSE Disp
Спецификация aSENSE Disp
Available on request
Delivery across Russia
Order phone: +7(800)777-18-50
Description
aSENSE™ is an advanced converter designed for installation in climate zones. It measures both CO2 content and ambient temperature. The data is transmitted to the BMS system or controller and can be processed using UIP software.
aSENSE™ is a key component for implementing building climate control. The converter is suitable for solving various tasks in ventilation systems. It can also be used as an inexpensive signal relay in rooms where carbon dioxide poses a potential threat.
Application
aSENSE™ is intended for control in ventilation systems by transmitting data on CO2 content and temperature to the control system. A standard application is ventilation control in rooms occupied by people, such as offices, classrooms, and cinemas. Ventilation control is based on temperature and CO2 content data and helps reduce electricity costs and maintain a favorable indoor environment.
Advantages
- Maintenance-free
- Helps save electricity
- Various CO2 measurement ranges and different housing options available.
- RS485 protocol optional
- 5-year warranty
- Specifications
- Overall dimensions
- Connection
- Applications
|
Sensor |
aSENSE_Disp |
|
Measured gas |
Carbon dioxide CO2 |
|
Measured parameter |
Temperature |
|
Measured CO2 range |
0 – 2000 ppm (optionally 10000 ppm) |
|
Measured temperature range |
From -20 °C to 60 °C |
|
CO2 measurement accuracy |
± 30 ppm ±3% of measured value |
|
Temperature measurement accuracy |
±1 °C |
|
Dimensions |
120 mm x 82 mm x 30 mm |
|
Temperature compensation range |
From 0 to 50 °C |
|
Operating humidity range |
From 0 to 95% RH (non-condensing) |
|
Power supply |
24 V AC/DC ±20% |
|
Response time |
≤1 min |
|
Data transmission |
UART (Modbus Protocol) |
|
Service life |
˃ 15 years |
|
Warranty |
5 years |
|
Output No. 1 |
0/2 – 10 V DC or 0/4 – 20 mA (CO2) |
|
Output No. 2 |
0/2 – 10 V DC or 0/4 – 20 mA (°C) |
Attention!
The same grounding scheme must be used for the control system and the sensor
Terminals and jumpers on aSENSE. Dark positions are set by default. The measurement start point jumper is not installed on some models.
You may find useful
.jpg "CO2 Concentration Converter with Analog Outputs. IP 54 — eSENSE Ind advantageous low prices in St. Petersburg")
