Embedded dew point sensor — FA 505
FA 505 Specification
Available on request
Delivery across Russia
Order phone: +7(800)777-18-50
Description
FA 505 - a new generation of dew point sensors for measuring the residual moisture of compressed air and other gases. The FA 505 housing is specially optimized for limited space in dryer systems.
Features
- Optimized design for limited space in dryer systems
- Measurement range -80...20°C dew point
- Extremely high long-term stability
- Analog output 4...20 mA
- Insensitive to condensate
- Fast response time
- Use at pressures up to 350 bar (special version)
- Modbus-RTU interface
- Higher sensor signal resolution thanks to improved electronic components
- On-site sensor diagnostics using a portable device or CS Service Software
- Specifications
- Overall dimensions drawing
- Applications
| Technical Specifications FA 505 | |
| Accuracy: | ± 1°C at +50...-20°C t.r. ± 2°C at -20...-50°C t.r. ± 3°C at -50...-80°C t.r. |
| Pressure range: | -1...50 bar optionally up to 350 bar |
| Power supply: | 24 VDC (16...30 VDC) |
| Protection class: | IP 65 |
| EMC: | in accordance with DIN EN 61326-1 |
| Operating temperature: | -20...70 °C |
| Electrical connection: | M8, 4-pin |
| PC interface: | Modbus-RTU interface (RS 485) |
| Outputs: | 4...20 mA (2-wire) or RS 485 Modbus |
| Analog output load: | < 500 Ohm |
| Connection: | G 1/2“ |
| Unit selection: | % RH, °C t.r., g/m³, mg/m³, ppm V/V |
| Scaling: | adjustment of 4...20 mA |
| Housing material: | zinc alloy |
| Sensor protection: | Sintered stainless steel filter 50 µm |
You may find useful
-min.jpg "New dew point sensors with digital and analog outputs — FA 510 / FA 515 competitive prices in Saint Petersburg")
