9 Августа 2017 г.
The overpressure sensor is a measuring device that has a separating diaphragm for contact with the measured medium, and transmits the pressure exerted on the diaphragm through an oil filling to a silicon piezoresistive crystal.
26 Июля 2017 г.
FPT Motorenforschung AG develops engines designed for vehicles and mechanisms in the Powertrain segment of CNH Industrial. To measure their efficiency, FPT Motorenforschung uses tools such as the M5 series pressure transducers from KELLER AG.
28 Июня 2017 г.
Measuring CO2 concentration allows for creating a more favorable indoor climate and saving electricity by controlling individual fans, ventilation dampers, valves, etc.
23 Июня 2017 г.
The period from the moment a hen lays an egg until the chick hatches from it is 21 days, and throughout this time it is critically important to maintain the necessary ambient air conditions in the incubator, particularly the concentration of carbon dioxide.
7 Июня 2017 г.
It is known that all engines produce CO, especially during cold start. To protect against this, catalytic converters are installed on vehicles. Therefore, a modern engine with a catalyst heated to operating temperatures generates 140 times more CO2 than CO.
31 Мая 2017 г.
Monitoring the level in tanks containing waste is necessary to prevent their penetration into the soil and harm to people and the environment.
24 Мая 2017 г.
Engineers usually have to design cabin pressure systems that will withstand even the most extreme conditions of the aircraft. In this article, we will look at many of the possible options and applications of Keller pressure sensors and how we can use them in this situation.
10 Мая 2017 г.
Carbon dioxide has been recognized as a refrigerant for over 150 years. Currently, the automotive industry has begun to consider reducing the amount of carbon dioxide emissions into the atmosphere when using air conditioning systems. Pressure measurement plays a key role in this process.
30 Марта 2017 г.
Regardless of the application area of the level sensor, insufficient protection can allow moisture to penetrate the cable, causing premature device failure. Moisture ingress onto the cable terminals and further down to the electronic components should be prevented by taking precautionary measures.
23 Марта 2017 г.
The design of submersible level transmitters and their membranes is optimized to minimize the device's susceptibility to contamination. Nevertheless, prolonged operation of the level transmitter in a contaminated environment may lead to the accumulation of dirt particles on the sensor membrane.
_80x0_e6f.jpg "Pressure Transmitter Series 23SX-H2")
1)_80x0_e6f.jpg "Happy Defender of the Fatherland Day!")
_80x0_c25.jpeg "Radar Level Meter IZMERKON RL 37")
